Commander 4S Module Overview (Rev. 3) - Auerswald COMmander Basic.2 Installation And Commissioning Instructions

Fig. 4: COMmander 4S module (rev. 3)
0
Terminal clamps (removable) for connecting to the S
ports 1-4 (see circuit board label)
RJ-45 socket for connecting to the S
LEDs for displaying the status of S
RJ-45 socket for connecting to the S
LEDs for displaying the status of S
A connector for switching the operating mode on the
S port 1
0
A connector for switching the operating mode on the
S port 2
0
A connector for switching the operating mode on the
S port 3
0
COMmander 4S
port 1 including
0
ports 1 and 2
0
port 3 including
0
ports 3 and 4
0
Module Overview (Rev. 3)
0
A connector for switching the operating mode on the
S port 4
0
0
DIP switches for terminators on the S
DIP switches for terminators on the S
DIP switches for terminators on the S
DIP switches for terminators on the S
A connector for attachment on the base circuit board
A connector for connecting to the front panel of 19"
casing variants
Preparation (Modules)
port 1
0
port 2
0
port 3
0
- port 4
0
19