Keysight E1459A SCPI Command Reference
STATus:OPERation:PSUMmary:ENABle?
Returns the value of the Operation Status Port Summary Enable Register as a
signed 16 bit integer.
Parameters
STATus:OPERation:PSUMmary[:EVENt]?
Returns the value of the Operation Status Port Summary Event Register as a
signed 16 bit integer and then clears the register to 0.
Parameters
Comments
STATus:PRESet
Presets the Status system registers and conditions.
Parameters
Comments
70
None
None
– This is a destructive read so that all register bits are cleared after the read
is executed.
– *RST does not affect the contents of the Status Operation Port Summary
Event Register.
– *CLS clears the contents of the Status Operation Event Port Register.
– STAT:PRESet does not affect the contents of the Status Operation Event
Port Summary register but does disable the reporting of the summary of
this register in bit 9 of the Status Operation Register.
None
– Resets the following registers and conditions:
Register
Status Byte
Standard Event event
Action
Register
none
OPER Status condition
none
OPER Status event
Keysight E1459A/Z2404B User and SCPI Programming Guide
STATus Subsystem
Action
none
none