Display:monitor:port:auto; Display:monitor[:State] <State - Keysight E1459A User & Scpi Programming Manual

Keysight E1459A SCPI Command Reference

DISPlay:MONitor:PORT:AUTO?

Returns the state of the automatic display mode as either +0 or +1.
Parameters
Comments
DISPlay:MONitor[:STATe] <state>
Turns the Display Mode on or off.
Parameters
Comments
Example
48
None.
– A 0 indicates the automatic display mode is OFF; a 1 indicates the
automatic display mode is ON.
– *RST Condition: sets the automatic mode on.
Parameter Name Parameter Type
<state> Numeric or discrete
– DISP:MON ON enables the terminal display of Port parameters. The
parameters are updated to the terminal following each new command
accessing a Port.
– The displayed data is in the format:
-- Displayed port number: 0, 1, 2, or 3
-- Size of the data: 16-bit word or 32-bit word
-- Actual data: signed decimal and hexadecimal
– A keyboard entry at the terminal sets DISP:MON OFF.
– *RST Condition: OFF.
DISP:MON ON turns the display mode on.
Range of Values
0 | 1 | OFF | ON
Keysight E1459A/Z2404B User and SCPI Programming Guide
DISPlay:MONitor Subsystem
Default
OFF