Inputn:clock[:Source]; Inputn:debounce:time <Time> | Minimum | Maximum | Default - Keysight E1459A User & Scpi Programming Manual

DISPlay:MONitor Subsystem

INPutn:CLOCk[:SOURce]?

Returns the programmed value of the input clock source for Port n.
Parameters
Comments
Example
INPutn:DEBounce:TIME <time> | MINimum | MAXimum | DEFault
Programs the input debounce time for Port n. Ports 0 and 1 share the same
debounce circuitry; Ports 2 and 3 share the same debounce circuitry.
Parameters
Comments
Keysight E1459A/Z2404B User and SCPI Programming Guide
Parameter Name Parameter Type
INPutn numeric
– The value returned is an unquoted string of
INPut2:CLOCk[:SOURce]?
Parameter Name Parameter Type
INPutn numeric
<time> numeric (floating pt)
DEFault
MINimum
MAXimum
– The available debounce times are:
18.0 S, 36 S, 72 S, 144 S, 288 S, 576 S, 1.13 mS, 2.26 mS, 4.6 mS,
9.2 mS, 18.4 mS, 36.9 mS, 73.8 mS, 148.0 mS, 294.0 mS, 590.0 mS, 1.18
S, 2.36 S, 4.72 S, 9.43 S, 18.9 S, 37.8 S, 75.0 S, 150.0 S, 300 S, 600 S,
1200 S, 2400 S, 4800 S, 9600 S. Any value sent other than those listed is
rounded to the nearest discrete value.
– Debounce time is rounded to the nearest discrete value. For example 16.0
S to 18.4 S is rounded to 18 S, 18.5 S to 36.4 S is rounded to 36 S,
36.5 S to 72.4 S is rounded to 72 S, etc.
– Ports 0 and 1 use the same debounce time, Ports 2 and 3 use the same
debounce time. For n = 0 or n = 1, both Ports 0 and 1 are set; for n = 2 or n
= 3, both Ports 2 and 3 are set.
Keysight E1459A SCPI Command Reference
Range of Values
0, 1, 2, 3
EXT INT
or
queries the input clock source for Port
Range of Values
0, 1, 2, 3
18.0 Sec through 9600 Sec
Default 18.0 Sec
Minimum 18.0 Sec
Maximum 9600 Sec
Default
0
.
Default
0
18.0S
ec
51