Command Quick Reference - Keysight E1459A User & Scpi Programming Manual

Keysight E1459A SCPI Command Reference

Command Quick Reference

Command Subsystem
DIAG:SYSR:STAT?
:ENAB <state>
:ENAB?
DISP:MON:PORT <port>
:MON:PORT? [MIN | MAX | DEF]
:MON:PORT:AUTO <state>
:MON:PORT:AUTO?
:MON[:STAT] <state>
:MON[:STAT]?
INPn:CLOC[:SOUR] EXT | INT
:CLOC[:SOUR]?
:DEB:TIM <time> |MIN | MAX | DEF
:DEB:TIM? [MIN | MAX | DEF]
MEAS:DIG:DATAn[:type][:VAL]?
:DIG:DATAn[:type]:BITm?
MEM:DEL:MACR <name>
[SENS:]EVEN:PORTn:DAV?
:PORTn:DAV:ENAB <state>
:PORTn:DAV:ENAB?
:PORTn:EDGE?
:PORTn:EDGE:ENAB <state>
:PORTn:EDGE:ENAB?
:PORTn:NEDG?
:PORTn:NEDG:ENAB <mask>
:PORTn:NEDG:ENAB?
:PORTn:PEDG?
:PORTn:PEDG:ENAB <mask>
:PORTn:PEDG:ENAB?
:PSUM:DAV?
:PSUM:EDGE?
78
Description
Returns the value of the Watchdog Timer state (1=asserted, 0=not
asserted).
Turns the Watchdog Timer ON or OFF.
Returns the enabled state of the Watchdog Timer as either a +1, or +0.
Sets display monitor port (channel) or automatic mode.
Returns the port (channel) number of the current display.
Sets the automatic mode for the Display Monitor on or off.
Returns the state of the automatic display mode; either +0 or +1.
Turns the Display mode on or off.
Returns the value of the Display Monitor State; +0 (OFF) or +1 (ON).
Specifies the input circuitry clock source for Port n.
Returns the programmed value of the input clock source for Port n.
Programs the channel input debounce time for Port n
Returns the current debounce time as a floating point number.
Returns contents of Current Value Register(s) for the specified Port n.
Returns value of BIT m of Channel Data Register for specified Port n.
Deletes the MACRO command defined by the name <name>.
Returns status of DAVailable Event for Port n as either +0 or +1.
Enables Data Available interrupt into Port n by EXT clock source.
Returns state of DAVailable Event Enable for Port n as either +0 or +1.
Returns status of Edge Detect Event for Port n as either +0 or +1.
Enables / disables an edge event interrupt for Port n.
Returns state of the Edge Event Enable for Port n as a signed integer.
Returns value of Negative Edge Detect Register for 16 bits of Port n.
Sets the Negative Edge Detection Mask for Port n.
Returns value of Negative Edge Detection Mask as a 16 bit integer.
Returns value of Positive Edge Detect Register for 16 bits of Port n.
Sets the Positive Edge Detection Mask for Port n.
Returns value of the Positive Edge Detection Mask as a 16 bit integer.
Returns status of DAVailable Event for ALL ports as a 16 bit integer.
Returns the status of the edge events for ALL ports.
Keysight E1459A/Z2404B User and SCPI Programming Guide
Command Quick Reference
.