Diagnostic:sysreset Subsystem; Syntax; Diagnostic:sysreset[:State] - Keysight E1459A User & Scpi Programming Manual

Keysight E1459A SCPI Command Reference

DIAGnostic:SYSReset Subsystem

The DIAGnostic:SYSReset Subsystem controls and monitors the Watchdog
Timer. Refer to Chapter 1 for detailed information on the Watchdog Timer.

Syntax

DIAGnostic:SYSReset

DIAGnostic:SYSReset[:STATe]?

Returns the value of the Watchdog Timer state from the Watchdog Timer Control
/ Status Register.
Parameters
Comments
44
[:STATe]?
:ENABle <state>
:ENABle?
None
– Returns a 1 if the Watchdog Timer is asserted; returns a 0 if the Timer is
not asserted.
– Reading this register resets the Watchdog Timer.
– If the Watchdog timer is enabled, the state of the timer MUST be read
before the Watchdog time elapses. If the state is not read before the time
elapses, the Watchdog Timer asserts the VXIbus SYSRESET line.
Keysight E1459A/Z2404B User and SCPI Programming Guide
DIAGnostic:SYSReset Subsystem