Measure Subsystem; Syntax; Measure:digital:datan[:Type] [:Value] - Keysight E1459A User & Scpi Programming Manual

MEASure Subsystem

MEASure Subsystem
The MEASure commands are used for the Isolated Digital Input part of the
Keysight E1459A. These commands return data corresponding to the current
value of the input signals. Refer to Chapter 2 for more examples of using the
MEASure Subsystem.

Syntax

MEASure:DIGital:DATAn[:type][:VALue]?

MEASure:DIGital:DATAn[:type] [:VALue]?

Returns the current data for the specified Port n as a signed integer.
Parameters
Comments
Example
Keysight E1459A/Z2404B User and SCPI Programming Guide
:DIGital:DATAn[:type]:BITm?
Parameter Name Parameter Type
DATAn Numeric
TYPE discrete
– For TYPE WORD, the data is returned as a signed 16 bit integer. Example
values returned include: +0, +1, +32767, -32768. Specify port as either
DATA0, DATA1, DATA2, or DATA3.
– For TYPE LWORd, the data is returned as a signed 32 bit integer with Port
0 or Port 2 in the least significant bytes. Specify port as DATA0 or DATA2.
– Default is Port 0. :DATA is equivalent to :DATA0.
MEAS:DIG:DATA 1:WORD:VAL?
MEAS:DIG:DATA 0:LWORD:VAL?
Keysight E1459A SCPI Command Reference
Range of Values
0,1, 2, 3 for type WORD; 0, 2 for LWORd
WORD (Ports 0, 1, 2, or 3)
LWORd (for Ports 0 or 2)
Queries 16-bit data from Port 1
Queries 32-bit word from Ports 0 and 1
Default
0
WORD
53