Table of Contents
Advertisement
Keysight E1459A SCPI Command Reference
STATus:OPERation:ENABle?
Returns the value of the OPERation Status Enable Register as a signed 16 bit
integer.
Parameters
Comments
STATus:OPERation[:EVENt]?
Returns the value of the OPERation Status Event Register as a signed 16 bit
integer and then clears the register to 0.
Parameters
Comments
STATus:OPERation:PSUMmary:CONDition?
Returns the value of the OPERation Status Port Summary Condition Register as a
signed 16 bit integer.
Parameters
68
None
– The only defined bit is bit 9 which is the summary of the Data Available and
Edge Status for Ports 0, 1, 2, and 3. See Figure 3-1.
None
– The only bit in the OPERation Status Register used by the Keysight E1459A
is bit 9 (decimal weight 512) which contains the summary of the Operation
Status Port Register. This is a destructive read so that all register bits are
cleared after the read is executed.
– *RST does not affect the contents of the Status Operation Event Register.
– *CLS clears the contents of the Status Operation Event Register.
– STAT:PRESet does not affect the contents of the Status Operation Event
Register but does disable reporting the summary of this register in the
Status Byte Register (STB?).
None
Keysight E1459A/Z2404B User and SCPI Programming Guide
STATus Subsystem
Advertisement
Table of Contents
