DIAGnostic:SYSReset:ENABle <state>
DIAGnostic:SYSReset:ENABle <state>
Turns the Watchdog Timer ON or OFF.
Parameters
Comments
Example
DIAGnostic:SYSReset:ENABle?
Returns the state of the Watchdog Timer as either a (unsigned) 1, or 0.
Parameters
Comments
Returns a 1 if the Watchdog Timer is enabled. Returns a 0 if the Timer is not
enabled.
Keysight E1459A/Z2404B User and SCPI Programming Guide
Parameter Name
<state>
– A 0 or OFF turns the Watchdog Timer off; a 1 or ON turns the Timer on.
– CAUTION: When the Watchdog Timer is enabled (ON), the VXIbus
backplane SYSRESET line is asserted if the Watchdog Timer is allowed to
elapse. The Watchdog Timer is reset each time the state of the Timer is
read by the DIAG:SYSR:STAT? command.
DIAG:SYSR:ENAB ON
None
Keysight E1459A SCPI Command Reference
Parameter Type
Range of Values
numeric or discrete
0, 1, OFF, ON
Turns Watchdog Timer on
Default
0, OFF
45