Keysight E1459A SCPI Command Reference
SENSe Subsystem
The SENSe Subsystem configures Event Detection in the Keysight E1459A
Module. The Keysight E1459A has an event detector for each 16 bit Port to
detect positive or negative edge transitions and whether new data is available:
DAV New data is available on the specified digital input port(s).
NEDGe Negative Edge transition occurred on a specified digital input
PEDGe Positive Edge transition occurred on a specified digital input
For details on using the SENSe Subsystem, refer to Chapter 2.
Syntax
[SENSe:]EVENt
56
channel(s).
channel(s).
:PORTn:DAVailable?
:PORTn:DAVailable:ENABle <state>
:PORTn:DAVailable:ENABle?
:PORTn:EDGE?
:PORTn:EDGE:ENABle <state>
:PORT:EDGE:ENABle?
:PORTn:NEDG?
:PORTn:NEDG:ENABle <mask>
:PORTn:NEDG:ENABle?
:PORTn:PEDG?
:PORTn:PEDG:ENABle <mask>
:PORTn:PEDG:ENABle?
:PSUMmary:DAVailable?
:PSUMmary:EDGE?
Keysight E1459A/Z2404B User and SCPI Programming Guide
SENSe Subsystem