Table of Contents
Advertisement
STATus Subsystem
STATus:QUEStionable:CONDition?
Always returns a 0.
Parameters
Comments
STATus:QUEStionable:ENABle <mask>
Sets the value of the QUEStionable Status Enable Register.
Parameters
Comments
Keysight E1459A/Z2404B User and SCPI Programming Guide
Register
Standard Event enable
QUES Status Condition
QUES Status Event
QUES Status enable
The Questionable Status Condition, Event, and Enable registers
exist for SCPI compliance only. No status bits are defined or
reported in these registers.
None
– No bits are defined.
– *RST clears all Status Questionable Conditions.
– *CLS does not affect the contents of the Status Questionable Conditions.
– The STAT:PRESet command does not affect the Status Questionable
Conditions.
The Questionable Status Condition, Event, and Enable registers
exist for SCPI compliance only. No status bits are defined or
reported in these registers.
None
– No bits are defined.
Keysight E1459A SCPI Command Reference
Action
Register
presets to 0
OPER Status enable
none
OPER PSUM condition
none
OPER PSUM event
presets to 0
OPER PSUM enable
all transition filters
Action
presets to 0
none
none
presets to 0
none
71
Advertisement
Table of Contents
