Table of Contents
Advertisement
STATus Subsystem
STATus:OPERation:CONDition?
Returns the value of the Operation Status Condition Register as a signed 16 bit
integer.
Parameters
Comments
STATus:OPERation:ENABle <mask>
Sets the value of the OPERation Status Enable Register.
Parameters
Comments
Example
Keysight E1459A/Z2404B User and SCPI Programming Guide
None
– The only bit in this register used by the Keysight E1459A is bit 9 (decimal
weight 512) which contains the summary of the Operation Status Port
register.
– The Status Operation Condition register is not cleared by this command. It
is cleared only by executing the PSUMmary:EVENt command.
– *RST clears all Status Operation Conditions.
– *CLS does not affect the contents of the of the Status Operation
Conditions.
– The STATus:PRESet command does not affect the Status Operation
Conditions.
Parameter Name
Parameter Type
<mask>
– <mask> determines which OPERation Status conditions are summed. See
Figure 3-1. The events detected in the Port Summary Status Register are
reported in bit 9 of the Operation Status Register which in turn is reported
in bit 7 of the Status Byte Register.
– *RST and *CLS do not affect the value of the enable mask.
– STATus:PRESet sets the value of the enable mask to 0.
STAT:OPER:ENAB 0xFFFF
Range of Values
numeric
-32768 to 32767 (0000
Enable all bits of the Operation Status
Enable Register
Keysight E1459A SCPI Command Reference
to FFFF
)
h
h
Default
0
67
Advertisement
Table of Contents
