Display:monitor:port? [Minimum | Maximum | Default]; Display:monitor:port:auto <State - Keysight E1459A User & Scpi Programming Manual

DISPlay:MONitor Subsystem

DISPlay:MONitor:PORT? [MINimum | MAXimum | DEFault]

Returns the number of the current display Port as +0, +1, +2, or +3.
Parameters
Comments
DISPlay:MONitor:PORT:AUTO <state>
Sets the automatic mode for the Display Monitor on or off. When AUTO mode is
ON, the port being monitored is automatically set to the last last port measured.
Parameters
Comments
Example
Keysight E1459A/Z2404B User and SCPI Programming Guide
None
– When sent with no parameter, this query returns a decimal number
indicating the Port being monitored. If AUTO was selected as the Port
parameter in the DISP:MON:PORT <port> command, the query returns the
number of the most recently-viewed Port. If either MINimum or DEFault
was specified, this query returns a +0. If MAXimum was specified, this
query returns a +3.
Parameter Parameter Type
Name
<state> numeric or discrete
– a 0 or OFF turns the display monitor automatic mode off; a 1 or ON turns
the display monitor automatic mode on.
– *RST Condition: sets the automatic mode on.
DISP:MON:PORT:AUTO ON
Keysight E1459A SCPI Command Reference
Range of Values
0, 1, OFF, ON
Turns automatic display mode on
Default
OFF
47