Table of Contents
Advertisement
Keysight E1459A SCPI Command Reference
[SENSe:]EVENt:PORTn:PEDGe:ENABle <mask>
Sets the Positive Edge Detection Mask for Port n.
Parameters
Parameter Name
PORTn
<mask>
Comments
Example
[SENSe:]EVENt:PORTn:PEDGe:ENABle?
Returns the decimal value of the Positive Edge Detection Mask as a 16 bit
integer.
Parameters
Parameter Name
PORTn
Comments
62
Parameter Type
numeric
numeric
– Each bit enables the corresponding channel positive edge detect mask for
Port n. A 1 means the mask is enabled for that bit, a 0 means the mask is
disabled for that bit.
– *RST Condition: clears the mask (no enabled bits).
EVEN:PORT 1:PEDG:ENAB 32767
Parameter Type
numeric
– Returns a number in the range of -32768 to +32767.
– Each bit enables the corresponding channel positive edge detect mask for
Port n. A 1 means the mask is enabled for that bit, a 0 means the mask is
disabled for that bit.
– *RST Condition: clears the mask (no enabled bits).
Range of Values
0, 1, 2, 3 (PORT = PORT0)
-32768 to +32767 (0000
Enables Positive Edge Event Detection
on all bits of Port 1
Range of Values
0, 1, 2, 3 (PORT = PORT0)
Keysight E1459A/Z2404B User and SCPI Programming Guide
SENSe Subsystem
Default
PORT0
to FFFF
)
0
h
h
Default
PORT0
Advertisement
Table of Contents
