TallyGenicom Matrix Printer Programmer's Manual page 61

1 Bars per character: 2 tall bars and 3 short bars
2 Character set: 0 through 9
3 Start characters: 1 tall bar
Stop characters: 1 tall bar
4 Center character code: None
5 NULL character: diamond symbol
6 Intercharacter gap: Yes
7 Characters per symbol:
ZIP - 5 + 1 check character
ZIP+4 - 9 + 1 check character
ABC - 11 + 1 check character
8 Check digit: yes.
If a check digit is not sent, then the printer adds it.
If a check digit is sent, then the printer verifies it.
If a user-supplied check digit is wrong, then an error character is printed.
9 Delimiters: Space, comma, horizontal tab
10 HR characters: none
7265 Programmer's Manual
Copyright © 2004 TallyGenicom
57
Chapter 3 ANSI Bar Codes