Print Mode Selection - TallyGenicom Matrix Printer Programmer's Manual

Print Mode Selection

Data Structure
ASCII
hex.
dec.
Description This code sequence allows simultaneous control of print features like the character size
and attributes characters. By this code sequence several print features can be simulta-
neously set via the value of n. This command can also be used to reset all character sty-
ling features or to reset the printer to standard Pica font type by specifying n=0.
The value specified for n must be in the range of 0 to 255. See the following table for pos-
sible values of n.
Print mode selection byte:
7
ESC "!" <n>
1B 21 <n>
27 33 <n>
6 5 4 3 2 1
Double Strike
Enlarged
Italic
Underline Mode
0
0 = Pica (10 cpi)
1 = Elite (12 cpi)
Proportional
Condensed
Bold
ESC !
43
Character Styling