Paper And Text Formatting - TallyGenicom Matrix Printer Programmer's Manual

Paper and Text Formatting

Form Length in Lines
Form Length in Inches
Data Structure ASCII
hex.
dec.
ASCII
hex.
dec.
–
Description This code sequence sets the form length to n times the current line feed pitch (in in-
ches). Also the current print position is simultaneously defined as top of form.
The value specified for n must be an integer in the range of 1 to 127. This value is mul-
tiplied by the current line feed pitch to obtain the form length. For example, if 60 is
specified for n and the current line feed pitch is
ches. Once set by this sequence, the form length is not affected by changing the line
spacing. This code sequence is ignored if the value specified for n is not in the range
of 1 to 127.
—
This code sequence sets the form length to the number of inches specified by n. It
also defines the current print position as top of form.
The value specified for n must be an integer in the range of 1 to 22; otherwise the se-
quence will be ignored.
˜
This code sequence resets the perforation skip function (ESC N).
ESC "C" <n>
1B 43 <n>
27 67 <n>
ESC "C" <0> <n>
1B 43 0 <n>
27 67 00 <n>
set form length in lines
set form length in inches
⁄
1
inch, the form length is set to 10 in-
6
Paper and Text Formatting
ESC C
ESC C NUL
–˜
—˜
5