Activate/Deactivate Graphics Characters; Activate/Deactivate Direct Print Mode - TallyGenicom Matrix Printer Programmer's Manual

Activate/Deactivate Graphics Characters

Data Structure
ASCII
hex.
dec.
Description On receipt of this command, the ASCII codes hex.90 to hex.9F can be output as special
graphics characters.
Valid values for n are:
n = 0 (hex.00)
n = 4 (hex.04)

Activate/Deactivate Direct Print Mode

Data Structure ASCII
hex.
dec.
Description In this mode no complete lines from the print buffer are printed, but each character is prin-
ted immediately on receipt of the character, just like in a typewriter. In addition the printer
pushes the paper up, so that the user can immediately see the printed character and then
pulls the page down again to continue printing.
Valid values for n are:
n = 1 (dec.1 or dec.49, hex.01 or hex.31)
n = 0 (dec.0 or dec.48, hex.00 or hex.30)
112
Miscellaneous
ESC "m" <n>
1B 6D <n>
27 109 <n>
activates the control codes
activates the graphics characters
ESC "i" <n> or n
1B 69 <n> or n
27 105 <n> or n
activates the mode
deactivates the mode
ESC m
ESC i