TallyGenicom Matrix Printer Programmer's Manual page 283

With the sequence CSI n g for n the following parameters are available:
n hex. dec.
0 30 48
2 32 50
3 33 51
Examples:
CSI g clear horizontal tab stop at current position
CSI 3;4 g clear all horizontal and vertical tab stops
(for this also see page 52, Vertical Tab Stops ON/OFF)
Later changes of character density will not influence the physical position of the tab
stops.
A horizontal tabulation is executed by the HT control code (hex.09, dec.9); for this see
page 45, Horizontal Tab Stop.
function
clear horizontal tab stop at current position
clear all horizontal tab stops in current line
clear all horizontal tab stops in all lines
47
Print Positioning