Set Line Limit (Sll); Set Line Home (Slh) - TallyGenicom Matrix Printer Programmer's Manual

Set Line Home (SLH)

Set Line Limit (SLL)

Data Structure ASCII
hex.
dec.
ASCII
hex.
dec.
Description n = 1...maximal print area
CSI n SP
9B n 20
155 n 32
CSI n SP
9B n 20
155 n 32
Default setting: Physical left margin of medium or device.
n specifies the left margin. The first position is 1. The unit depends on PUM (Positioning
Unit Mode) and is either characters or defined by SSU (Select Size Unit, see page 8).
Example:
CSI SP U reset to physical left margin
CSI 10 SP U set left margin to position 10
Default setting: Physical right margin (=1) of medium or device.
n specifies the right margin.
The unit depends on PUM (Positioning Unit Mode) and is either character positions or
defined by SSU (Select Size Unit, see page 8).
Example:
CSI SP V reset to physical right margin
CSI 80 SP V set right margin to position 80
"U" [A] set line home
55
85
"V" [A] set line limit
55
85
CSI ... SP U
CSI ... SP V
Paper and Text Formatting
13