Score Selection - TallyGenicom Matrix Printer Programmer's Manual

Score Selection

Data Structure
ASCII
hex.
dec.
Description This Escape sequence switches on and off the underscore, overscore and strike-through
modes. The lines can be single or double, broken or continuous.
n = loc
1
n = type
2
loc (n
The parameter n
The following values are avaiable:
1
2
3
type (n
The parameter n
The following values are avaiable:
0
1
2
5
6
This command can be used more than once to activate the underscore, strike-through
and overscore modes at the same time with different line types.
This mode cannot be used to underscore, strike-through or overscore block graphic char-
acters.
40
Character Styling
ESC "(" "-" <3> NUL <1> <n
1B 28 2D 03
27 40 45 3
)
1
indicates the location of the score to be printed.
1
(hex.01) = underscore mode
(hex.02) = strike-through mode
(hex.03) = overscore mode
)
2
indicates the type of score to be printed.
2
(hex.00) = cancel scoring selected by n
(hex.01) = single continuous line
(hex.02) = double continuous line
(hex.05) = single broken line
(hex.06) = double broken line
> <n >
1 2
00 01 <n > <n >
1 2
0 1 <n > <n >
1 2
(loc)
1
ESC ( -