National Character Set; Command Description - TallyGenicom Matrix Printer Programmer's Manual

NATIONAL CHARACTER SET

Command Description
ESC [(p)x SELECT NATIONAL CHARACTER SET
p
0
1
2
6
7
8
9
16
If a parameter value (p) is not recognized, then the default character set (0 - USA) is
selected.
To use substitutions that have characters in the 80 hex to 95 hex range, first disable
8-bit control code processing, either by escape sequence or from the Emulation
Options Menu. Next, enable character set 2, either by the Straps and Options control
sequence on page 14 or from the Emulation Options menu. This causes ASCII
codes 80 hex - 9F hex to be mapped to printable characters instead of control codes.
Example: To select the United Kingdom character set:
Dec 27 91 55 120 Hex 1B 5B 37 78
7265 Programmer's Manual
Copyright © 2004 TallyGenicom
Character Set
USA
Germany
French A
Italian
United Kingdom
Spanish
Danish/Norwegian A
Swedish/Finnish D
16
Chapter 2 ANSI