Character Styling; Super-/Subscript Mode On - TallyGenicom Matrix Printer Programmer's Manual

Character Styling

Super-/Subscript Mode ON

Super-/Subscript Mode OFF
Data Structure ASCII
hex.
dec.
ASCII
hex.
dec.
–
Description This code sequence switches the printer to superscript or subscript mode.
The printer is switched to superscript mode when 0 (hex.00 or hex.30) is set for n, and
to subscript mode when 1 (hex.01 or hex.31) is set. The subsequent characters are
printed with about
responding character location.
If superscript or subscript characters are underlined, the underline character is printed
at its normal position.
The characters hex.B0 to hex.DF (dec. 176...dec.223) and hex.F0 to hex.FE
(dec.240...dec.254) of the extended EPSON graphics character set cannot be set to
superscript or subscript mode.
—
This code sequence resets the superscript or subscript mode to normal mode.
ESC "S" <n> or n
1B 53 <n> or n
27 83 <n> or n
ESC "T"
1B 54
27 84
⁄
2
of their normal height, either in the upper or lower half of the cor-
3
super/subscript mode ON
super/subscript mode OFF
ESC S
ESC T
–
—
29
Character Styling