R8C/11 Group
14.2 Repeat Mode
In repeat mode, the input voltage on one selected pin is A/D converted repeatedly. Table 14.3 lists the
specifications of repeat mode. Figure 14.5 shows the ADCON0 and ADCON1 registers in repeat
mode.
Table 14.3 Repeat Mode Specifications
Item
Function
Start condition
Stop condition
Interrupt request generation timing
Input pin
Reading of result of A/D converter
Rev.1.20
Jan 27, 2006
REJ09B0062-0120
Input voltage on one pin selected by CH2 to CH0 and ADGSEL0 bits is A/D
converted repeatedly
Set ADST bit to "1"
Set ADST bit to "0"
None generated
One of AN
to AN
0
Read AD register
page 130 of 204
Specification
, as selected
11
14. Repeat mode