How To Use This Manual - Renesas M16C Series Hardware Manual

1. Introduction
This hardware manual provides detailed information on the R8C/11 Group of microcomputers.
Users are expected to have basic knowledge of electric circuits, logical circuits and microcomputers.
2. Register Diagram
The symbols, and descriptions, used for bit function in each register are shown below.
X X X r e g i s t e r
b 7 b 6 b 5
*1
Blank:Set to "0" or "1" according to the application
0: Set to "0"
1: Set to "1"
X: Nothing is assigned
*2
RW: Read and write
RO: Read only
WO: Write only
−: Nothing is assigned
*3
•Reserved bit
Reserved bit. Set to specified value.
*4
•Nothing is assigned
Nothing is assigned to the bit concerned. As the bit may be use for future functions,
set to "0" when writing to this bit.
•Do not set to this value
The operation is not guaranteed when a value is set.
•Function varies depending on mode of operation
Bit function varies depending on peripheral function mode.
Refer to respective register for each mode.
*5
Follow the text in each manual for binary and hexadecimal notations.

How to Use This Manual

*1
S y m b o l
b 4 b 3 b2 b 1 b 0
X X X
0
Bit symbol
X X X B i t
X X X 0
XXX1
N o t h i n g i s a s s i g n e d .
(b2)
W h e n w r i t e , s h o u l d s e t t o " 0 " . W h e n r e a d , i t s c o n t e n t i s i n d e t e r m i n a t e .
R e s e r v e d B i t
( b 3 )
XXX4
X X X B i t
XXX5
X X X 6
X X X 7 XXX Bit
A d d r e s s A f t e r r e s e t
X X X 0 0
h
Bit Name Function
b 1 b 0
1 0 : X X X
0 1 : X X X
1 0 : A v o i d t h i s s e t t i n g
1 1 : X X X
Must set to "0"
Function varies depending on each
operation mode
0: XXX
1: XXX
*5
RW *2
RW
RW
*3
RW
*4
R W
W O
R W
RO