Table 120-C. 2Way Vt1 Connections (Ecc-Equipped Shelf, Fully Populated) - Alcatel-Lucent 1677 SONET Link Manual

DLP-120
Is trouble cleared?
29
Were VT1s provisioned in step 14?
30
Enter
31
table 120-C
where:
FROM=Refer to table
TO=Refer to table
in table 120-C, is not populated in shelf, TO VT1 port = first VT1 port in next shelf. If
last port on last shelf, TO VT1 port = first VT1 port on first shelf.
Example:
ENT-CRS-VT1::VT1-2-A-3-1-1,VT1-2-A-4-1-1-1:::2WAY;
Repeat step
32

Table 120-C. 2WAY VT1 Connections (ECC-Equipped Shelf, Fully Populated)

FROM VT1
(SLOT-SUBSLOT-EC1#-STS1#-
ORDER GROUP#-VT1#)
1. 2-A-1-1-1-1
2. 2-A-3-1-1-1
3. 2-A-5-1-1-1
4. 2-A-7-1-1-1
5. 2-A-9-1-1-1
6. 2-A-11-1-1-1
7. 3-A-1-1-1-1
8. 3-A-3-1-1-1
9. 3-A-5-1-1-1
10. 3-A-7-1-1-1
11. 3-A-9-1-1-1
12. 3-A-11-1-1-1
13. 4-A-1-1-1-1
14. 4-A-3-1-1-1
15. 4-A-5-1-1-1
4-90
If yes, go to step 22.
If no, go to step 28.
If yes, go to step 31.
If no, go to step 35.
ENT-CRS-VT1:::FROM,TO:::2WAY;
for FROM and TO values.
120-C
120-C for daisy chain provisioning order. If TO VT1 port, as shown
31 until all VT1 daisy chain connections have been made.
to establish VT1 cross-connections. Refer to
for daisy chain provisioning order.
TO VT1
(SLOT-SUBSLOT-EC1#-STS1#-
GROUP#-VT1#)
2-A-2-1-1-1
2-A-4-1-1-1
2-A-6-1-1-1
2-A-8-1-1-1
2-A-10-1-1-1
2-A-12-1-1-1
3-A-2-1-1-1
3-A-4-1-1-1
3-A-6-1-1-1
3-A-8-1-1-1
3-A-10-1-1-1
3-A-12-1-1-1
4-A-2-1-1-1
4-A-4-1-1-1
4-A-6-1-1-1
Set Up ECC Modules for Error-Free Verification Tests
3EM13850AD
Issue 01, September 2007