Alcatel-Lucent 1677 SONET Link Manual page 145

3EM13850AD
Issue 01, September 2007
Enter
8
ENT-EVC::AID;
module. Enter command for every GIGE module in shelf. Refer to CKL-111.
where:
AID=EVC facility AID
&& ranging and & grouping allowed
Enter
9
to create facility protection groups with working and protect facilities. Create paired
facility protection groups for all OC-n ports on all OCn modules in shelf. Refer to
CKL-109.
where:
n=3, 12, 48, or 192
PROTECTED_ID=working OC-n AID
PROTECTING_ID=protect OC-n AID
Begin with first OCn module in shelf.
10
Is OCn module to be supported by TMUXs and VSCs?
11
Enter
12
STS-1 facility for every OC-n on working OCn module. Enter command for every
working OCn module in shelf that will use TMUX and VSC resources. Refer to
CKL-109.
where:
AID=STS-1 facility AID
&& ranging and & grouping allowed
Enter
13
every STS-1 provisioned in step 12. Refer to CKL-109.
where:
AID=T3 facility AID
&& ranging and & grouping allowed
Enter
14
provisioned in step 13. Refer to CKL-109.
where:
AID = DS1 facility AID
&& ranging and & grouping allowed
Go to step 21.
15
Set Up GIGE and OCn Modules for Error-Free Verification Tests
to provision the first EVC facility for every GigE facility on GIGE
ENT-FFP-OCn::PROTECTED_ID,PROTECTING_ID::::PTYPE=LINEAR,PSDIRN=UNI;
If yes, go to step 12.
If no, go to step 16.
ENT-STS1::AID::::STSMAP=ASYNC&VTFLOAT&VTCRS;
ENT-T3::AID::::FMT=ASYNC,STSMAP=VTFLOAT&VTCRS;
ENT-T1::AID::::FMT=SF;
to provision only the first DS1 facility in every DS3
DLP-121
to provision the first
to provision a DS3 in
4-101