Alcatel-Lucent 1677 SONET Link Manual page 64

DLP-105
Enter
5
agent>exit
Log In Through Console Connection
Enter
6
where: PID=login password provided by superuser or installer
Enter
7
where:
oldpw=old password (defined in step 6).
newpd=new password (6 to 32 characters).
Was console session established?
8
Does a telnet connection need to be created?
9
Set Up System for Telnet Connection
Connect Ethernet cable to ETHERNET port on TC-11-A or TC-11-B, and connect other
10
end to network according to site specifications.
Using established console session, enter
11
ED-NE:::::SWITCHNAME
assign node name, IP address, and IP subnet mask.
where:
SWITCHNAME=<value> is node name.
IPADDR=<value> is a user-supplied IP address.
IPMASK=default value 255.255.255.255
Enter
12
where:
SID=site identifier.
4-20
to quit CLI (if configured for CLI response).
EXIT
ACT-USER::administrator:::PID;
ED-PID:::administrator:::oldpw,newpd;
If yes, go to step 9.
If no, contact next level of support.
If yes, go to step 10.
If no, go to step 19.
=
<VALUE>,IPADDR
to create a site identifier.
SET-SID:::::SID;
to login as administrator.
to change administrator password.
=
<VALUE>,IPMASK
Set Up Console and Telnet Sessions
3EM13850AD
Issue 01, September 2007
= to
255.255.255.255;