Alcatel-Lucent 1677 SONET Link Manual page 115

3EM13850AD
Issue 01, September 2007
Backplane-Mounted MPX Fiber-Optic Connector
Do not touch tip of TX757E swab.
18
Insert swab handle into swab optical cleaning tool (extender). See figure 117-4.
WARNING: Possibility of equipment damage. Use care to prevent damaging
19
backplane-mounted fiber-optic connector pins when cleaning
backplane-mounted fiber-optic connectors.
Use penlight to light backplane-mounted fiber-optic connector.
20
Is fiber-optic connector top mounted or bottom mounted?
21
Clean fiber-optic connector by gently wiping fiber ferrule once from top to bottom,
22
discard TX757E swab, then go to step 24.
Clean fiber-optic connector by gently wiping fiber ferrule once from bottom to top,
23
discard TX757E swab, then go to step 24.
Insert TX757E swab into bulkhead (barrel) receptacle and rotate swab, sliding it in
24
and out to clean inside of receptacle, then discard swab.
Go to step 29.
25
Clean Fiber-Optic Connectors
If top mounted, go to step 22.
If bottom mounted, go to step 23.
DLP-117
4-71