No.
11. Power Cord*1
12. Sponge Strip
*1
: In China, do not use the power cord provided with this unit. Contact your supervisor and use the
power cord specified for use in China.
Installation
• The unit must be connected to a power source that is close to the unit and easily accessible.
• Make sure that the main machine is switched off and that its power cord is disconnected before
doing the following procedures.
Tapes
1. Remove all tape and packing material from the front, left, rear, and right sides.
2. Open the front door [A].
3. Grip handle [B] and slowly pull the fold unit out of the machine.
Description
Multi-Folding Unit FD4000 (D615)
Q'ty
1
1
203