Machine Level; Minimum Space Requirements - Ricoh MP 7503SP Field Service Manual

2. Installation
• Directly exposed to heat from a heater
8. Do not place the machine where it will be exposed to corrosive gases.
9. Do not install the machine at any location over 2,000 m (6,500 feet) above sea level.
10. Place the copier on a strong and level base with the front and back of the machine within ±5 mm
(0.2") of level.
11. Do not place the machine where it may be subjected to strong vibrations.
12. Do not connect the machine to a power source shared with another electrical appliance.
13. The machine can generate an electromagnetic field which could interfere with radio or television
reception.

Machine Level

Front to back: Within ±5 mm (0.2") of level
Right to left: Within ±5 mm (0.2") of level
The machine legs may be screwed up or down in order to level the machine. Set a carpenter's level on
the exposure glass.

Minimum Space Requirements

Place the machine near the power source with minimum clearance as shown below. The same amount of
clearance is necessary when optional peripheral devices are installed.
82