2. Installation
11. If you want the anti-condensation heaters to remain on at all times, detach the third harness from
the bundle, then connect to the same PCB at CN930.
Load Paper, Attach Decals
Paper Size Decals
1. Load the paper trays.
2. At the upper right corner of each tray [A], clean the area below the tray number.
3. Peel the appropriate decal [B] from the accessory sheet and attach it to the tray.
Original Decals
1. Use a damp clean cloth to wipe clean the surface of the original feeder.
2. Attach the precautions decal to the feeder cover
130