Table of Contents
Advertisement
2. Installation
SP5812-001
SP5841-001
Important Notice on Security Issues
In order to increase the security of the MFP, and to ensure that the customer sets the administrator
password, an administrator set/change prompt display appears the first time the machine is turned on.
Overview
The Program/Change Administrator screen appears when the machine is turned on if the passwords
have not been set. This is a new security feature.
• After the customers set the administrator/supervisor login password, the Home display every time
the machine is turned on.
• However, setting these passwords is not mandatory. The customer disable the Program/Change
Administrator screen if they choose not to set passwords
Canceling Password Setup
1. On the Program/Change Administrator screen, press [Change] next to Supervisor and then touch
[OK] without inputting any password.
2. Touch [OK] again when the Confirm password display shows up.
3. For Administrator 1, do the same procedure as steps 1 and 2.
4. Press the [OK] button. The Home display appears.
134
Service Telephone Number Settings.
Enter the contact number of the customer engineer. This is the number
displayed when a service call is issued.
Supply Name Setting – Toner Name Setting:
Advertisement
Chapters
Table of Contents
