1. Overview of components
1.3.1 Versions of the connector
Multi−pin connection,
Type of left−hand end plate
1) Note that all cables to a cable harness must be grouped to ensure EMC conformity.
2) Note that all 0 V−/24 V supply cables must be used and grouped to a cable harness.
Tab. 1/1: Multi−pin plug types of the left−hand end plates
1−6
Plug type
Sub−D with 9 pins
Sub−D with 25 pins
Sub−D with 44 pins
1)
Terminal strip
2)
Ribbon cable
Number of controllable
solenoid coils
1, 2, 3, ... 8
1, 2, 3, ... 24
1, 2, 3, ... 32
1, 2, 3, ... 32
1, 2, 3, ... 32
Festo P.BE−MPAL−EN en 1008NH