General Instructions On Mounting/Dismantling; Mounting - Festo MPA-L Series Description

2. Mounting

2.1

General instructions on mounting/dismantling

Festo P.BE−MPAL−EN en 1008NH
Warning
Uncontrolled movements of the connected actuators and
loose tubing can cause injury to persons and/or damage to
property.
Before carrying out mounting, installation and maintenance
work, switch off the following:
Compressed air supply
The operating and load voltage supplies.
Note
Handle all modules and components of the valve terminal
MPA−L with great care. Note especially the following:
The specified torques must be complied with.
Electrostatically sensitive devices.
Therefore, do not touch any contact surfaces.
Note
Mount the valve terminal MPA−L so that there is sufficient
space for heat dissipation and ensure that the maximum
limits for temperatures are observed (see Technical
specifications").
2−3