Exchange Sub−Base, Supply Plate Or Extend Or Exchange Right−Hand End Plate - Festo MPA-L Series Description

5. Conversion and maintenance
5.3.2 Exchange sub−base, supply plate or extend or exchange right−hand
end plate
Valve terminal MPA−L
MPA1
1) Maximum number of sub−bases when exclusively equipped with one size and with valves having
the same number of solenoid coils
Tab. 5/3: Maximum number of sub−bases
Festo P.BE−MPAL−EN en 1008NH
You can easily adapt the valve terminal MPA−L to the require
ments of your machine or system by exchanging or adding valve
positions.
At all valve positions valves with one or two solenoid coils can
be fitted. If only one size and valves with the same number of
solenoid coils are used the following maximum number of sub−
bases (Tab. 5/3) occurs:
Valve positions per
sub−base n
1
1
4
The maximum number of controllable solenoid coils is limited
by the connection option (multi−pin plug type or CPX terminal,
see Chapter 1.3 and 1.4).
For 32 controllable solenoid coils the maximum number of
sub−bases (X can be calculated as follows:
max)
32
+
X
max
n n
1
2
Solenoid coils per
valve position n
2
1
2
1
2
max. number
1)
X
max
32
16
8
4
5−11