Description Of Components; Valves - Festo MPA-L Series Description

1. Overview of components
1.5

Description of components

1.5.1 Valves

Valve labelling
ID code
B
D
DS
I
R
H
HS
I
J
K
KS
Festo P.BE−MPAL−EN en 1008NH
The valve terminal MPA−L can be fitted with 2x 2/2−, 2x 3/2−way
valves, 5/2−way valves and 5/3−way valves and further valve
types (see Tab. 1/3).
The valves on the MPA−S valve terminal are marked by
identification codes (see Tab. 1/3). By means of this identifi
cation on the top of the valve, you can ascertain the equip
ment fitted on your valve terminal MPA−L.
Valve
5/3−way valve, mid−position open
Two monostable 2/2−way valves, normally closed, pneumatic spring return
Two monostable 2/2−way valves, normally closed, pneumatic spring return
5/3−way valve, mid−position exhausted
5/3−way valve, mid−position closed
Two monostable 3/2−way valves, control side 12 normally open, control side 14
normally closed, pneumatic spring return
Two monostable 3/2−way valves, control side 12 normally open, control side 14
normally closed, pneumatic spring return
Two 2/2−way valves, normally closed, pneumatic spring return
With dual−pressure operation:
Operating pressure via connection (1) or connection (5)
With vacuum operation:
Operating pressure at connection (1), Vacuum at connection (5) (e.g. for
vacuum switching with ejector pulse)
5/2−way double pilot valve
Two monostable 3/2−way valves, normally closed, pneumatic spring return
Two monostable 3/2−way valves, normally closed, pneumatic spring return
1−9