5. Conversion and maintenance
Fig. 5/5: Connecting sub−bases by means of tie rod
5.3.3 Replace the electronic module
5−14
8. Mount the valve terminal on the mounting surface
(see Chapter 2 ).
9. Then fit the pneumatic and electrical connections
(see Chapter 3).
Each sub−base, 4x sub−base and supply plate is fitted with a
separate electronic module. A list of all available electronic
modules can be found in Chapter
To exchange an electronic module the valve terminal MPA−L
must be partially dismantled (see Chapter 5.3.2).
3.6.
Festo P.BE−MPAL−EN en 1008NH