Electrical Multi−Pin Connection - Festo MPA-L Series Description

1. Overview of components
1.3 Electrical multi−pin connection
Festo P.BE−MPAL−EN en 1008NH
The following operating modes can be used independently
of valve type:
Standard operation with one or more pressure zones
Reversible operation with compressed air supply via
connections (3), (5) and exhaust via port (1)
Low−pressure operation at 0 ... 3 bar
Vacuum operation at −0.9 ... 0 bar
The electrical connection of the solenoid coils is made cen
trally via a multi−pin plug in the left−hand end plate, which
is available in various variants for the he valve terminal MPA−L
(see Tab. 1/1). One or two solenoid coils per v alve position
can be controlled. Each solenoid coil occupies one pin of the
multi−pin plug.
1−5