Installation/Replacement Of The Threadless Cartridges - Festo MPA-L Series Description

3. Installation
Line
Compressed air or
vacuum,
Exhaust air Exhaust air
External pilot air
supply
ducted pilot
exhaust air
Air or vacuum
1) Depending on what you have ordered, the valve terminal may already be fitted with cartridges/
screw connectors.
Tab. 3/3: Assignment of the connections

3.4.1 Installation/replacement of the threadless cartridges

Installation
Festo P.BE−MPAL−EN en 1008NH
Connection code Port size
(ISO 5599) (ISO 228)
(1) QSPKG20
(3), (5) (3) (5)
G¼"
(12/14) M7
(82/84)
(2) or (4) QSPKG10
Proceed as follows:
1. For selecting the correct cartridge use: Tab. 3/3
2. Press in and turn the cartridge to the stop in the port.
3. Keep the cartridges in the pressed in state and insert a
suitable clamp strap in the slot (see Fig. 3/5). Obser ve the
guide steps on both sides.
The clamp strap must slot into the end position.
1)
Port
Cartridge in the pneumatic supply
plate and in the exhaust plate
Fitting in the right−hand end plate
Fitting in the right−hand end plate
Cartridge in the sub−base
3−15