Display And Control Elements - Festo MPA-L Series Description

1. Overview of components
1.7

Display and control elements

1
5
1
switching status indicator (yellow LEDs)
of the valves
2
Manual override (per pilot solenoid
coil, non−detenting or detenting)
Fig. 1/8: Display and control elements on the example of the valve terminal with CPX
terminal
1−22
The following connecting and control elements can be found
on the valve terminal MPA−L:
3
4
5
Information on the electrical connection and display compo
nents of the CPX bus node is provided in the corresponding
Electronics description" (see the system description for your
CPX terminal, table Descriptions of the CPX terminal").
Inscription panel
Slot for inscription label holder
(see Chapter 2.4)
Pneumatic interface fault LED
(see Chapter 3.6.2)
Festo P.BE−MPAL−EN en 1008NH
2
3
4