Setting The Pressure Regulating Valve - Festo MPA-L Series Description

3. Installation
1
Zone 1
7
6
1
Pressure zone 1
2
Pressure zone 2
3
Pressure zone 3
4
Pressure zone 4
5
Right−hand end plate with supply
connection (1) and exhaust ports (3)
and (5) for pressure zone 4
Fig. 3/2: Example: Valve terminal MPA−L with four possible pressure zones

3.3.3 Setting the pressure regulating valve

3−10
2
Zone 2
6
7
Using the adjusting screw on the pressure regulator plate (see
Fig. 3/3) you can change the flow (see also Flow diagrams of
the pressure regulator valve plates" in Appendix A).
3 4
Zone 3 Zone 4
Supply plate (here: for pressure
zone 1)
Identification of the special sub−base
with integrated pressure zone
separation (here: for the separation of
channel (1) between pressure zone 1
and pressure zone 2)
Festo P.BE−MPAL−EN en 1008NH
5