Valve Terminal Design - Festo MPA-L Series Description

1. Overview of components
1.2

Valve terminal design

1
1
Multipin sub−base with cover (here:
IP40 cover)
2
Pneumatic supply plate with exhaust
plate for ducted exhaust air (3/5)
3
Sub−base with electronic module and
valve or blanking plate
Fig. 1/1: Main components of the valve terminal MPA−L
1−4
The valve terminal MPA−L consists of the following pneumatic
and electric components: The most important components
are shown in Fig. 1/1.
2 3
4
Sub−bases, 4 off set, with common
electronic module and valves or
blanking plates
5
Vertical stacking (here: Pressure
regulator plate with installed valve and
optional pressure gauge)
6
Right−hand end plate
4 5
Festo P.BE−MPAL−EN en 1008NH
6