Wall Installation/Removal; Standard Mounting Points Of The Valve Terminal - Festo MPA-L Series Description

2. Mounting
2.3

Wall installation/removal

2.3.1 Standard mounting points of the valve terminal

Festo P.BE−MPAL−EN en 1008NH
Note
Installation on uneven, flexible surfaces can damage the
valve terminal MPA−L.
Mount the valve terminal MPA−L only on flat, torsionally
·
rigid surfaces.
Note
The overloading of mounting holes or natural resonance
when vibrating can cause damage.
In addition to the information about standard mounting
·
points in Chapter 2.3.1 also observe the information
about additional mounting points in Chapter
The end plates, the multipin sub−base and pneumatic
interface contain holes for fitting the terminal onto a wall
(see Tab. 2/2).
2.3.2.
2−9