gefran ADV200 Functions Description And Parameters List page 82

Menu PAR Description
17.1 2100 Encoder 1 pulses
Setting of the number of feedback encoder impulses.
Menu PAR Description
17.2 2102 Encoder 1 supply
Setting of the encoder supply voltage supplied by the relative optional card. Min and max values are modified
according to the type of encoder card applied.
Encoder option type
Enc1
Enc2
Enc3
Enc4
Enc5
Enc6
Enc7
Enc8
Menu PAR Description
17.3 2104 Encoder 1 input cfg
Setting of the input configuration of the incremental digital encoder, TTL or HTL.
0 HTL
1 TTL
The value of this parameter is automatically set in HTL when the value entered in the Encoder 1 supply pa-
rameter is more than 6.0V.
Menu PAR Description
17.4 2106 Encoder 1 repetition
Setting of the divider to apply to the encoder repetition output frequency.
0 No division
1 Divide 2
2 Divide 4
3 Divide 8
Menu PAR Description
17.5 2108 Encoder 1 signal Vpp
Setting of the encoder signal peak-to-peak voltage value. Incremental sinusoidal encoders and absolute
SinCos encoders normally produce signals with a peak-to-peak voltage of 1 Vpp. Due to voltage drops along
the cable, the signal may have a lower peak-to-peak voltage when it reaches the feedback card, triggering the
Speed fbk loss alarm.
This parameter is used to configure the value of the peak-to-peak voltage of the incremental sinusoidal encod-
ers and absolute SinCos encoders on the input terminals of the feedback card.
Menu PAR Description
17.6 2110 Encoder1signal check
Configuration of which channels of the incremental digital encoder must be controlled for processing the Speed
fbk loss [22].
0 Check disabled
1 Check A-B
2 Check A-B-Z
82
UM Type
ppr UINT16
UM Type
V FLOAT
EXP-DE-I1R1F2-ADV
EXP-SE-I1R1F2-ADV
EXP-SESC-I1R1F2-ADV
EXP-EN/SSI-I1R1F2-ADV
EXP-HIP-I1R1F2-ADV
EXP-RES-I1R1-ADV
EXP-DE-I2R1F2-ADV
EXP-ASC-I1-ADV
UM Type
ENUM
UM Type
ENUM
UM Type
V FLOAT
UM Type
ENUM
FB BIT Def
CALCI
FB BIT Def
5.2
Def Min Max
5.2V 5.2V 20.0V
5.2V 5.2V 6.0V
5.2V 5.2V 6.0V
5.2V 5.2V 10.0V
8.0V 7.0V 12.0V
- - -
5.2V 5.2V 20.0V
5.2V 5.2V 6.0V
FB BIT Def
TTL
FB BIT Def
No division
FB BIT Def
1.0
FB BIT Def
Check A-B
Min Max
CALCI CALCI
Min Max
5.2 CALCF
Min Max
0 1
Min Max
0 3
Min Max
0.8 1.2
Min Max
0 1
ADV200 • Functions description and parameters list
Acc Mod
RWZ FVS
Acc Mod
ERWZ FVS
Acc Mod
ERWZ FVS
Acc Mod
ERWZ FVS
Acc Mod
ERWZ FVS
Acc Mod
ERWZ FVS