B - Parameters And Functions Description (Expert List); Legend - gefran ADV200 Functions Description And Parameters List

B – Parameters and functions description (Expert list)

Legend

  
Menu PAR Description
1 - MONITOR
1.1 250 Output current
1.2 252 Output voltage
22.1 - FUNCTIONS/SPEED RATIO
22.1.1 3000 Dig speed ratio
22.1.2 3002 Speed ratio src

Indexing of the menu and parameter

Parameter identifier

Parameter description

UM: unit of measure
Type of parameter
BIT Boolean, from modbus seen as 16 bits
ENUM Selection list, from modbus seen as 16 bits
FLOAT Real, from modbus seen as 32 bits
FBM2SIPA 16-bit unsigned integer. Only PAR of existing
parameters accepted.
FBS2MIPA 16-bit unsigned integer. Only PAR of existing
parameters accepted.

INT16 Integer with sign 16 bits, from modbus seen as 16 bits
INT32 Integer with sign 32 bits, from modbus seen as 32 bits
ILINK Selection list, from modbus seen as 16 bits
LINK Selection list, from modbus seen as 16 bits
UINT16 Integer without sign 16 bits, from modbus seen as
16 bits
UINT32 Integer without sign 32 bits, from modbus seen as
32 bits
SINT Integer 8 bits

Format of data exchanged on Fieldbus (16BIT, 32BIT)
8
   
UM Type FB BIT
( Level 1 menu )
A FLOAT 16/32
V FLOAT 16/32
( Level 2 menu )
perc INT16 16/32
LINK 16/32 3000
L_VREF ( Selection List ) [*]





[*]

Def Min
0.0 0.0
0.0 0.0
100 CALCI
0
CALCF Value calculated as a number with
Default value
floating point
CALCI Value calculated as a whole
Minimum value
number
SIZE Value depending on the size of the
Maximum value
drive
Accessibility :
E Expert
R Read
S Size (set value depending on the size of the device)
W Write
Z parameters that can be modified ONLY with the drive disa-
bled
Available in regulation mode:
V = V/f Control
S = Vect Flux OL
F = Vect Flux CL
Selection lists:
The "... src" format parameters are linked to a selection list.
The source of the signal that will control the parameter can be
selected from the list indicated.
The lists are indicated in paragraph C of this manual.
ADV200 • Functions description and parameters list
  
Max Acc Mod
0.0 R FVS
0.0 R FVS
CALCI ERW FVS
16384 ERW FVS