gefran ADV200 Functions Description And Parameters List page 178

Menu PAR Description
5800 FL Fwd 1 inv mon
5802 FL Fwd 2 inv mon
5804 FL Fwd 3 inv mon
5806 FL Fwd 4 inv mon
5808 FL Fwd 5 inv mon
5810 FL Fwd 6 inv mon
5812 FL Fwd 7 inv mon
5814 FL Fwd 8 inv mon
These parameters are not used on the master drive.
On the slave drive these parameters show the value received from the previous drive. The " Inv" parameters
enable the value received to be used with the opposite sign, without changing any of the data sent to subse-
quent slaves.
These parameters are available in the "src" analog parameter selection lists.
Menu PAR Description
6000 Null
This signal forces the variable to the zero level (always disabled).
Menu PAR Description
6002 One
This signal forces the variable to level one (always active).
Menu PAR Description
6004 Speed limit state
This signal is activated when the drive is in the speed limit condition.
Menu PAR Description
6006 Current limit state
This signal is activated when the drive is in the current limit condition.
178
7 1 = PLC 8 fault active
UM Type FB BIT
INT32 32BIT
INT32 32BIT
INT32 32BIT
INT32 32BIT
INT32 32BIT
INT32 32BIT
INT32 32BIT
INT32 32BIT
UM Type FB BIT
UINT32 32
UM Type FB BIT
UINT32 32
UM Type FB BIT
BIT 16
UM Type FB BIT
BIT 16
Def Min
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Def Min
0 0
Def Min
1 1
Def Min
0 0
Def Min
0 0
ADV200 • Functions description and parameters list
Max Acc Mod
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
0 ER
Max Acc Mod
0 ER
Max Acc Mod
1 ER
Max Acc Mod
1 ER
Max Acc Mod
1 ER