gefran ADV200 Functions Description And Parameters List page 72

Menu PAR Description
15.1 1800 Analog out 1 src
15.2 1802 Analog out 2 src
Selection of the origin (source) of the signals that can be placed as variables on the analog outputs. The func-
tions that can be assigned to the analog outputs are listed in the "L_ANOUT" selection list.
Menu PAR Description
15.3 1808 Analog out 1 scale
15.4 1810 Analog out 2 scale
Parameter for setting a multiplier factor of the signal of the relative analog output. It can be used to amplify or
reduce the input value of the relative analog output block.
+10V
-10V
(
Vout = 10 x
where:
Vout
output voltage on the card terminals.
Stp Var actual value of the variable (variable unit)
SF Var full scale of the variable (variable unit)
Example of calculation of scale factor Analog out x scale
To display the drive speed, use an analog instrument with field of measurement from 0...2V. This means that, to
display the speed of the drive, a voltage of 2V on the analog output of the drive must correspond to the maxi-
mum speed. With a scale factor equal to 1 a voltage of 10V would correspond to the maximum speed.
With a scale factor equal to 0.2 = 2V/10V a voltage of 2V would correspond to the maximum speed.
Menu PAR Description
15.5 1816 Analog out 1 mon
The value of the actual voltage present on analog output 1 is displayed.
Menu PAR Description
15.6 1818 Analog out 2 mon
The value of the actual voltage or current present on analog output 2 is displayed.
72
UM Type
LINK
LINK
UM Type
FLOAT
FLOAT
1
0V
Stp Var x par. 1808 (1810)
FS Var
UM Type
cnt INT16
UM Type
cnt INT16
FB BIT Def
16/32 6000
16/32 6000
FB BIT Def
1.0
1.0
2
Internal V
3
)
FB BIT Def
0
FB BIT Def
0
Min Max
0 16384
0 16384
Min Max
-10.0 10.0
-10.0 10.0
Par. 1808 (1810) = 1
1
Par. 1808 (1810) = 0,5
2
Par. 1808 (1810) = -1
3
Min Max
0 0
Min Max
0 0
ADV200 • Functions description and parameters list
Acc Mod
RW FVS
RW FVS
Acc Mod
RW FVS
RW FVS
Acc Mod
ER FVS
Acc Mod
ER FVS