gefran ADV200 Functions Description And Parameters List page 74

Menu PAR Description
15.16 1858 Analog out 1X scale
15.17 1860 Analog out 2X scale
Parameter for setting a multiplier factor of the signal of the relative analog output of the expansion card. It can
be used to amplify or reduce the input value of the relative analog output block.
(
Vout = 10 x
where:
Vout output voltage on the card terminals.
Stp Var actual value of the variable (variable unit)
SF Var full scale of the variable (variable unit)
Example of calculation of the Analog out Xx scale factor
To display the drive speed, use an analog instrument with field of measurement from 0 ... 2V. This means that,
to display the speed of the drive, a voltage of 2V on the analog output of the drive must correspond to the maxi-
mum speed. With a scale factor of 1 this would be 10V (Scale factor = 2V / 10 V = 0.200).
Menu PAR Description
15.18 1866 Analog out 1X mon
The actual value of the voltage present on analog output 1 of the expansion card is displayed.
Menu PAR Description
15.19 1868 Analog out 2X mon
The actual value of the voltage or current present on analog output 2 of the expansion card is displayed.
Menu PAR Description
15.20 1874 An out 1X absolute
15.21 1876 An out 2X absolute
Enables the relative analog output as an absolute value. If this parameter is set to 1 the voltage on the analog
74
UM Type
FLOAT
FLOAT
+10V
1
0V
-10V
Stp Var x par. 1858 (1860)
FS Var
UM Type
cnt INT16
UM Type
cnt INT16
UM Type
ENUM
ENUM
FB BIT Def
1.0
1.0
2
Internal V
3
)
FB BIT Def
0
FB BIT Def
0
FB BIT Def
Disable
Disable
Min Max
-20.0 20.0
-20.0 20.0
1858 (1860) = 1
Par.
1
1858 (1860) =
Par. 0,5
2
1858 (1860) = -1
Par.
3
Min Max
0 0
Min Max
0 0
Min Max
0 1
0 1
ADV200 • Functions description and parameters list
Acc Mod
RW FVS
RW FVS
Acc Mod
ER FVS
Acc Mod
ER FVS
Acc Mod
ERW FVS
ERW FVS