gefran ADV200 Functions Description And Parameters List page 80

Menu PAR Description
16.21 2064 Measured FlxX
Measured flux saturation value.
Menu PAR Description
16.22 2066 Measured P1
Measured value of the first parameter to define the motor magnetization curve.
Menu PAR Description
16.23 2068 Measured P2
Measured value of the second parameter to define the motor magnetization curve.
Menu PAR Description
16.24 2070 Measured P3
Measured value of the third parameter to define the motor magnetization curve.
Menu PAR Description
16.25 2072 Measured Rr
Measured rotor resistance value.
Menu PAR Description
16.26 2078 Take tune parameters
Saves the motor data calculated by the self-tuning procedure in the drive.
Note !
Data are not saved permanently. Use the "Save Parameters" command in the DRIVE CONFIG menu to save in the permanent
memory.
80
UM Type FB BIT
Wb FLOAT
UM Type FB BIT
FLOAT
UM Type FB BIT
FLOAT
UM Type FB BIT
FLOAT
UM Type FB BIT
ohm FLOAT
UM Type FB BIT
BIT
Def Min
CALCF 0.0
Def Min
0.05 0.0
Def Min
9.0 3.0
Def Min
0.87 0.0
Def Min
CALCF 0.0005
Def Min
0 0
ADV200 • Functions description and parameters list
Max Acc Mod
0.0 ERWS FVS
Max Acc Mod
1.0 ERWS FVS
Max Acc Mod
18.0 ERWS FVS
Max Acc Mod
1.0 ERWS FVS
Max Acc Mod
200.0 ERWS FVS
Max Acc Mod
1 ERWZ FVS